Clarifiers are settling tanks built with mechanical means for continuous removal of solids being deposited by sedimentation. Our clarifier is run centrally driven type. The double gear box and thrust bearing arrangement of this machine are success fully run in 24 hours. The size range of clarifiers is within 1.5m dia to 35m dia.
A Parallel Plate Separator (PPS) is a skid mounded equipment used for chemical treatment. This is a mild steel vessel, we are internally protect to FRP or Epoxy coating and outside protection is 2 coat Epoxy painting. These inclined plates provide a large effective settling area for a small footprint. Weir. The size range stars within 1000LPH to 10000LPH. (1.2mX0.8m to 4.5mX 3.2m)
We are making a High quality pressure withstanding Sand and Carbon Filters Up to 2.8 meter Diameter for filter water through a multiple bed Medias. We fabricate sand and carbon filter in MS or SS that can be used to STP, ETP, WTP & RO, in MS filters we provide the FRP, Rubber lining, or Epoxy Coating in internal protection. Our filters easy to backwash.
Our diffused Aeration system is a total unit with blowers, one set of diffusers and all the necessary equipment’s. This system consists of fine bubble diffusers and course bubble diffusers. Reputed brand blower and diffuser are used in this system.
Aerators are various devices used for aeration in fixed water level. Commonly the impeller is made to MS with FRP Coating. Capacity Starts – 2HP, 5HP, 7.5HP, 10HP, 12HP, 15HP, 20HP, 25HP.
An oil skimmer is a device that is designed to remove oil floating on a liquid surface.
Stirrer unite also use to mix the chemicals in water and waste water treatment plants. We have commonly stirrer too that can function in 2-4 compartment tank with a single motor.
Clariflocculator is a combination of flocculation and clarification in a single tank. It has two concentric tanks where inner tank serves as a flocculation basin and the outer tank serves as a clarifier.
Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane to remove ions, molecules and larger particles from semi waste water and drinking water.
The filter press is a solid liquid separation device using the principle of pressure feeding. It has been used successfully in almost every industrial filtration
Bio – medical Incineration is a waste treatment process that involves the combustion of Medical waste. Incineration and other high-temperature waste treatment by using of Diesel Burners and LPG Burners. With 100 Feed SS or Ms Chimney. These Incinerators are mainly useful to hospitals. The Capacity starts within 50kg/Hr. to 300Kg/hr.
Incineration is a waste treatment process that involves the combustion of organic substances. Incineration and other high-temperature waste treatment by using of Coconut shell or natural firing. These Incinerators are mainly useful to Auditorium, Commercial complex, small industries, Automobile showrooms Etc. The Capacity starts within 25kg/hr. to 100Kg/hr.
A venturi scrubber is designed to effectively use the energy from the inlet gas stream to atomize the liquid being used to scrub the gas stream. This type of technology is a part of the group of air pollution controls collectively referred to as wet scrubber.
The term wet or Water scrubber describes a variety of devices that remove pollutants from a furnace flue gas or from other gas streams. In a wet scrubber, the polluted gas stream is brought into contact with the scrubbing liquid, by spraying it with the liquid, by forcing it through a pool of liquid, or by some other contact method, so as to remove the pollutants.
An overhead crane, commonly called a bridge crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge. If the bridge is rigidly supported on two or more legs running on a fixed rail at ground level.
The industrial lift is use to lift the good in ground flour to up flour. The main advantage of this equipment is less man power is use to work.
THERMAL EVAPORATION SYSTEMS FOR RO REJECT CONCENTRATION. Design, build, supply, installation, erection and commissioning of multi stage evaporation unit is another in house strength of NTEC team.
The inner part of the boiler consists of a huge tank filled with water, and across the water are pipes, or "tubes”. The fuel present inside the boiler is burnt with the presence of a fire and the hot gases which are formed as a result oozes out through the pipes. There are numerous pipes and the gases present in the boiler which get so hot that the water gets heated inside the tube, resulting the steam to flow off the top to be utilized as energy.
